With time, concrete surfaces may develop cracks and holes, which can be a tripping hazard if not repaired in good time.
In addition to this, such imperfections may lower the aesthetic appearance of your floors and walls. By using a concrete patch, you can easily repair small cracks and other surface imperfections before the problem worsens.
Concrete patching products are easy to use, and the best part is that some of the formulas come pre-mixed, making them super convenient for all users.
Additionally, concrete patching kits are inclusive of user instructions that will guide you on how you can mix the components to get quality results.
The patching compounds on this review list are of premium quality so you can expect top-grade results on your next repair project.
Best Concrete Patch
1. Dap 326 Phenopatch Pre-Mixed Concrete Patch
The pre-mixed concrete patch from DAP is formulated with your patching needs in mind, so you can buy this product knowing that it will help you seal up all imperfections on masonry and concrete surfaces.
Moreover, it is very easy to apply, so you won’t have a difficult time using this compound. And the fact that it is pre-mixed means you only need to add the right amount of water and you will be good to go.
To add to this, it is a high-strength formula, thus making it one of the reliable patching formulas that you can go for.
Patching concrete surfaces can be a bit challenging, but that won’t be the case when you use this formula.
Besides, its use can apply when sealing anything from small cracks to fairly large holes. It dries hard, thus providing you with a hard finish.
Plus, this concrete patch does not shrink, and neither does it sink provided that you apply it correctly.
In addition to this, it comes with instructions that will guide you on how best you can apply the product to get maximum results. Aside from patching, this formula can also be used when spot leveling surfaces.
The other thing that you will like about the Dap 326 Phenopatch Pre-Mixed Concrete Patch is that it can assist you when patching cracks on both indoor and outdoor surfaces.
- Comes pre-mixed
- No thinning is required
- Creates a non-shrinking patch
2. Rust-Oleum 215173 301012 Concrete Patch
You can easily repair surface cracks using this premium quality concrete patch. It comes from a brand that is known for producing products that are not only reliable but also durable.
Once applied, this concrete patch will cure to form a hard surface that you can repaint with ease. However, you will have to wait for eight hours before applying the paint.
More to that, the product can work with virtually all concrete coatings. Also, it permanently bonds with concrete surfaces, so don’t expect it to peel off after it has cured.
Additionally, it does not crack, thus making it even more convenient. If you apply the formula as directed by the manufacturer, you will get an elegant finish that is equally smooth.
Like the product before it, this formula does not shrink, so it will provide you with a durable patch that will leave the surface looking like it’s new. It mixes easily and can be applied using a putty knife or any other applicator that suits you.
With this product, you will be able to patch mortar joints, sidewalks, steps, just to mention but a few.
It will deliver quality results in all scenarios, so you just have to ensure that you mix base and the activator to get the right consistency.
- Low odor
- Heavy-duty formula
- Can patch concrete walls and floors
- Mixes Easily
3. Damtite 04072 Concrete Super Patch Repair
Damtite is proud to present you with a high-strength patching formula that you can use when repairing basement floors, steps, driveways, etc.
This is a two-component formula, so you will be required to mix the included powder and liquid to get a durable concrete patch.
To add to this, the formula adheres to surfaces very well, so it will hide all the cracks that may be causing your floor to look ugly. This product comes in a large pail, so you will have enough patching compound to cover a large area.
You can as well apply this patch on stone and brick surfaces. In addition to repairing holes and cracks, this patch can come in handy when leveling surfaces.
What makes this concrete patch unique is that it can repair a wide range of materials. With that said, you can apply it to glass, aluminum, wood, and metal.
To make it even better, it won’t cause acidic reactions with metal surfaces. It won’t matter whether the surface that you are repairing is placed vertically or horizontally, this patch will help you get the job done.
Moreover, it can restore worn out surfaces in three easy steps, making this a suitable option for DIY enthusiasts. When mixing the formula, ensure that you use a clean container to avoid possible contamination.
- Hardens well
- Excellent adhesion
4. SIKA – 472189 Sikacryl Ready-Mix Concrete Patch
The patching formula by Sika is also another excellent option that you can count on when repairing surfaces.
Furthermore, it is textured so it will blend well with concrete surfaces once it has fully cured. This concrete patch has good adhesion and is also easy to work with. You can apply multiple layers depending on how deep the cracks are.
When repairing surface holes, ensure that you give each layer enough time to cure before applying the next coat. Plus, no prep-work is required before application since the formula is ready-mix.
Nonetheless, the surface that is to be repaired should be cleaned and kept dry to increase the surface area for maximum contact. This acrylic-based concrete patch cures to a tough finish in a matter of hours.
The recommended curing time is 24 hours, but this may vary depending on the number of coats that you have applied. This patching formula can repair large holes the same way it would small cracks. You just have to apply enough product to get the needed coverage.
But, that is not all; you can easily clean it off from your tools using water once you are done making the repairs. Plus, it is available in different sizes, so you can go for the pail that matches your needs.
- VOC compliant
- Ready-mix Formula
- Hardens Fast
5. DAP 37584 Liquid Cement Crack Filler
Most concrete patch formulas may require you to mix the compound before using it, but that does not apply to this product.
After application, the compound dries gray, thereby providing you with a finish that looks almost the same as the surface that you are repairing.
The fact that the formula comes in a bottle means it cannot be easily contaminated during application.
Apart from that, it is very easy to store, so you can use the product multiple times depending on the frequency of use and the size of the area that you want to repair.
Besides, the bottle has a nozzle-like design and will allow you to apply the formula with exact precision. This feature can come in handy when patching small holes on both horizontal and vertical surfaces.
To add to this, the bottle minimizes wastage by ensuring that the product is only applied to target areas. The ingredients used in this formulation are of high quality, so you can rest assured that this product will provide you with the quality results that you are looking for.
This concrete patch covers cracks completely, so you can apply it in all areas that may require repair. It has self-leveling properties, hence making it even more dependable.
The good thing about this patching formula is that it can even be used in high traffic areas. As such, you can patch up your driveway and walkway without worrying about coming off. The repaired area will be ready for use in approximately forty-five minutes.
- Does not crack or shrink
- Easy to use
- No sealing required
- Dries fast
6. Red Devil 0641 Pre-Mixed Concrete Patch
This is yet another pre-mixed formula that will provide you with exceptional results. With the help of this concrete patch, you will be able to repair a wide range of imperfections with minimal fuss.
Plus, it has all the qualities that you may look for in a patching formula, so you can apply this product to different surfaces knowing that it will patch up all the holes and cracks.
This product comes in pails, but you can as well go for the squeeze tube if you are looking to cover a small area.
It adheres strongly to concrete surfaces and dries to a concrete color. As if that is not enough, the product won’t shrink during or after application, meaning that it will provide you with complete coverage.
In addition to this, it will effectively seal breaks and cracks in concrete, thus leaving the surface in good condition. In case the product spills over to the adjacent surfaces, you can easily wash it off without experiencing any problems.
However, this product should not be applied in areas with high vehicular traffic since this may weaken the patches.
On the bright side, you can use it inside or outside depending on your needs. It will make the repair work easier and will also save you more time, especially when patching a large area.
- Water Clean up
- Interior and Exterior use
- Fast-drying formula
- Permanent repairs
7. FDC 3 Part EPOXY Mortar Patching
The concrete patch from FDC is a waterproof formula that you can apply on damp surfaces without worrying about anything.
This product can bond to just about any clean surface, so it won’t matter whether you are working with concrete, metal, or asphalt.
More to that, it does not take a lot of time to cure. This may, however, vary depending on the number of layers that you have applied.
When you buy this product, you will get three ingredients that you can mix to get a reliable patching formula.
The manufacturer also provides you with the mixing instructions that will simplify your work when using this formula. Once it has dried up, this concrete patch can take on anything that the weather may throw at it.
Unlike the product just before it, this formula can help you repair high traffic areas, so you can use it when repairing parking lots and cracked driveways. It can also adhere to brick and other masonry surfaces.
According to the manufacturer, this concrete patch is up to ten times stronger compared to regular cement, so it will deliver a tough finish that is equally durable.
This patching compound can prove useful when repairing basement floors, steps, damaged chimneys, and many more. It will deliver top-grade results provided that you mix the components correctly.
- Can withstand extreme conditions
- Quick application
8. Dap Incorporated Pre-Mixed Concrete Patch
If you are looking for a non-shrink concrete patch, this product may just end your search. The compounds from which this product is formulated allows it to bond strongly to concrete surfaces, so you will be able to make your repairs with a single application.
To add to its list of benefits, this patching formula spreads easily and will allow you to cover large holes using just a small portion of the product. To get maximum results, ensure that you apply enough patching formula in the area that you are repairing.
This formula will hold up well even when applied on exterior surfaces. As such, it won’t be affected by heavy rains or snow, thus making it even more durable.
Aside from floors, this product can also be used when patching up cracks on walls. This product comes ready-to-use, so you won’t experience any difficulty throughout the time that you will be using it.
Before applying the compound, you should clean and remove surface debris so that it can bond well with the concrete.
The product is nicely packaged in a pail to give users easy access to the contents. By using a putty knife or a trowel, you can scoop the amount that you intend to use and save the rest for later use.
When storing this concrete patch, the lid has to be sealed tightly to prevent the product from drying up.
- Bonds easily with concrete
- Heavy duty
- Does not require mixing
9. MRO Chem Perfect Patch Concrete Repair
You can permanently seal cracks using this three-part formulation from MRO Chem. The pail contains silica filer, epoxy, and a hardener, which have to be mixed to get the patching compound.
Each of the components has a special role that it plays in the formula, so you have to ensure that you mix the products in the right amounts.
When applied, this patching compound will provide you with a finish that is both tough and impervious.
The patched area requires four to six hours to dry up, but you may have to give it more time before it can be ready for heavy-duty use.
Additionally, ensure that you fill all the cracks and holes properly to maximize the bonding effect. The patching system can assist handymen who are looking to repair worn-out concrete surfaces or those with hairline cracks.
This formula can also prove useful when patching garage floors, driveways, patios, and other high traffic areas.
Plus, no sealing is required after the application process, so you can leave the patched area as it is without worrying about it getting damaged. If you are after quality, this concrete patch is one of the formulas that you can go for.
- Not Pre-mixed
- Maximum coverage
- Hardens fast
- Corrosion proof
10. Sakrete Product Top ‘n Concrete Patcher
This is also another highly raved patching formula, and it is for a good reason. It spreads effortlessly and is also easy to work with, meaning that it will allow you to cover more area within a limited duration.
The compound is specially formulated to make your work easier when making structural repairs to masonry and concrete surfaces. To add to this, it is durable, so it won’t be affected by the elements or any other destructive factors.
This product comes pre-mixed, so you will only be required to add water to form a thick paste. After application, the compound will cure in minutes, so you can apply multiple coats after the previous layers have dried up.
By using this formula, you will be able to make horizontal, vertical, and overhead repairs with ease. Moreover, it adheres to concrete surfaces almost immediately, so it won’t come off easily.
The other thing that is worth mentioning about this concrete patch is that it ships in a large pail that you can use several times depending on the size of the area that you want to cover.
But most importantly, it can effectively seal both small and large surface imperfections. Moreover, you will get all the instructions that you may need when mixing the compound with water.
This will enable you to mix the compound according to need. Nonetheless, you should not add too much water since this may make the formula less effective.
- Extremely Tough
- Quick and easy application
- Good Quality
- Delivers a long-lasting finish
. Rust-Oleum 253479 Concrete Saver TurboKrete Concrete Patch
Rust-Oleum’s concrete patch has amazing features that would impress any handyman. This compound can easily fill up deep holes and small crevices without giving the user any problem.
Furthermore, the formula is epoxy-based, meaning that water and other corrosive chemicals cannot penetrate through the patched section once the compound has cured.
This patching compound cures fast, so it will minimize your downtime when handling large projects.
The kit is inclusive of an aggregate, activator, and a base. Ensure that mix all the components as per the manufacturer’s instructions since this will determine the type of finish that you will get.
When applying this patching compound, you won’t have to use a sealer because it can hold up against the elements on its own.
However, you can always apply a layer of paint in case the color of the patched area does not match that of the adjacent surfaces.
This product has excellent adhesion to concrete, so you won’t have to do one area multiple times for it to bond. The formula has a full cure time of 72 hours, after which you can use the patched area.
That is not all, this product is easy to trowel, so you won’t struggle during the application process. It cures to a light grey color that will match with most concrete surfaces.
- Fast-curing formulation
- Easy to mix
- Suitable for interior/exterior use
- Can withstand heavy traffic
Frequently Asked Questions
Can I use a concrete patch on my driveway?
Yes. A good number of concrete patching formulas can be used when repairing high traffic areas such as driveways, sidewalks, curbs, etc.
However, this does not apply to all patching compounds, so ensure that you check on the product specifications.
What makes a good concrete patch?
This will depend on your needs since the products are formulated differently. Some perform better when used indoors, while others can work both indoors and outdoors.
As such, you should consider going for a product that matches your needs. When choosing a concrete patch, some of the things that you should consider include; the curing period, durability, ease of application, and the size of the imperfection that you want to repair.
Do all concrete patch formulas come pre-mixed?
No. Some formulations may require you to mix the components that are included in the kit.
Finding the right concrete patch for your repair projects can be somewhat challenging because there are so many formulas on the market.
Nevertheless, you can make your work easier by going for the high-quality products that we have listed above.
We have assorted some of the best concrete patch, so you can make your purchase having full assurance that you will get exceptional results.
The patching formulas that we have gone through are easy to use, thus making them a suitable option for DIY lovers and professional contractors.