It might be necessary to use screws while working with particle boards. However, you must ensure to use the best fasteners and screws for the task.
Many woodworkers often face the rigors to choosing the right screws and fasteners, but this buying guide will help them. Usually, products like engineered woods like medium-density fibreboard (MDF), and particle board have specific textures.
You need quality screws that don’t break easily. It’s often easy to drill holes on these materials and drive your threaded screws.
With an ideal technique, these types of screws can penetrate through a (gypsum) drywall. The right particle board screws should have diameter and lengths of between 2 to 6mm, and to 200 mm respectively.
Phillips pan head and regular 4 x 16mm screws with smaller heads are easy to drive through dense particle boards.
Even without pre-drilling, any multi-purpose screw should offer impressive drive performance. Before buying particle board screws, ensure they have been designed with a decent thread technology. Apart from their efficiency, versatile screws often bite into the board finely.
Depending on your woodwork projects, it might be tricky to choose between a tapered wood thread or deep-thread screws.
If your particleboard has melamine coating, it will be wiser to choose screws that allow you to gain precision. However, other factors determine the quality of screws and the depth of pilot holes that might be required for these screws.
Don’t forget that over-tightening particle board screws can ruin your woodwork applications. Let’s share some features of the build quality, diameters, and lengths of decent screws for particle boards.
Best Screws For Particle Board
#1. The Hillman Group Coarse Threaded Screw Set
The Hillman Group Coarse Thread Screws have extra sharp points, and they are well packaged in a box. This set of 221-pieces drywall screws can be used on wallboard, softwood, and particle boards. As a 25-gauge steel screw, the #2 Phillips thread has a thickness value of 0. 0209 inches.
However, the size of each of these coarse-threaded screw measures 6 x 1-5/8 inches. When you need to coat these screws with paint, this black-phosphate finish will enhance their adhesion strengths. Also, they are designed for general woodworking and interior applications.
Their precision-tips are sharp and it’s easy to drive the heads of these screws with regular screwdrivers or power tools.
#2. T.K.Excellent Set Of Self-Tapping Screws And Self-Drilling Ribbed Anchors
Do you need quality screws to fasten particle boards and wallboards? This 66-piece set of T.K.Excellent Self-Tapping Screws comes with anchors (plug cases).
These ribbed anchors increase the holding power of your screws. Also, these woodwork accessories a plastic case are stacked in a plastic case with 6 compartments. Consequently, it’s easy to sort and pick the right screw from the plastic case.
There are three (#6 x 1, #8 x 1.25, #10 x 1.5 inches) types of Phillips Flat Head screws in this box. Additionally, it’s easy to drive the pan heads of these self-tapping screws. They meet the ANSI standards too. However, ribbed anchors can be split into halves and they include E6, E7, and E8.
#3. Kreg Pocket Hole Screws
Kreg offers 1-1/4-inch Pocket-Hole sturdy screws that are suitable for fastening 3/4-inch stocks. It comes as a set of 500 screws with Maxi-Loc and coarse thread designs.
Apart from the coarse thread, the pack includes fine thread screws. You can use them for a variety of indoor construction projects. Also, these Zinc screws rust-resistant and they have strong holding strength.
You don’t need to worry about overdriving in pocket bottoms because they have been designed with the precise screw length. Usually, pocket hole screws with auger tips are sharp.
These self-tapping screws can maintain the required driving force without pre-drilled holes. Additionally, this model of Kreg screw is durable and its steel shank has a large diameter.
#4. Bolt Dropper Xylan 1 x 8-Inch Screws
Outdoor screws with superior rust-protection are ideal for saltwater and wet environments. Xylan wood screws by Bolt Dropper is recommended for all types of composite woods.
Unlike screws with stripping heads, these black-coated screws have been designed with deep-cut Philips Drive. Also, stainless steel screws with coarse threads are sturdy. This set of marine-grade steel screws have flush heads.
Since these Flat Head Phillips screws have superior designs, it will be hard to see them with rust stains or chipped heads. Also, their precision tips and coarse threads bit well composite woods. Apart from their amazing durability, these high-performance screws are reliable.
#5. VIGRUE Drywall Screw Set
An assortment of screws with the right pull-out resistance is ideal for installing drywall in offices or houses? These black VIGRUE Screws with bugle heads have great fastening effects.
Since these carbon steel screws contain mercury-free coats, there will be no environmental threats while using them. Also, the Phillips drive head has a corrosion-proof topcoat and it’s suitable for household applications.
Usually, professional woodworkers prefer screws that stay tight in particle boards. Since this set of VIGRUE screws have different sizes, you can use them for different fastening applications.
The assortment includes 25, 30, 40, 50, 60, and 70 mm. Additionally, this set of 200 carbon steel screws are well-sorted (according to their sizes) in a portable plastic case.
#6. Rok Hardware Pack Of 100 Zinc-Plated Screws
This pack of Rok Hardware Pan Head Screws weighs 7.4 oz, and it’s affordable. Apart from particle boards, these Zinc-plated screws have impressive holding power and they are available in packs of 1,000.
While each of these standard thread Phillips #2 screws measures 1/2 inch, they have high tensile strength. Usually, metal and woodworkers prefer short screws because of their excellent pull-out resistance.
More so, this model of Rok Hardware screws is durable. They can be used on softwood, plastic composites, and thin sheet metals.
You don’t have to drill deep holes before the threads of these Zinc-coated screws can be forced into a workpiece. Since they have come with an impressive design, you can use them for interior construction applications.
#7. Grip-Rite Grey Coarse-Thread And Bugle Head Screws
With weather-proof machine screws, you can fasten outdoor frames, particle boards, and plank ends securely. These Grip-Rite coarse-thread screws are suitable for outdoor construction projects.
Each screw measures 3 inches and they are made of rugged steel materials. Also, they are well packaged in a cardboard box that’s labeled with some descriptions.
The size of this exterior screw is number 8 and they have bugle heads. Since there are 75 pieces of these sturdy screws per pound, you can complete small fences and posts DIY projects.
Additionally, rust-resistant screws are required for tasks that involve treated lumbers. These coarse-thread screws have sharp points, and they are affordable.
#8. FASTENMASTER HeadLOK Flathead Fastener
The 2-7/8-inch FastenMaster screw comes with a Spider drive that prevents cam-out when fastening particle boards.
It can be used to support joists and reduce labor costs during woodwork projects. You don’t need to pre-drill when using these screws because they pierce through your workpiece easily. Also, these made-in-America and corrosion-resistant screws come with flat-head designs.
Since the wafer head increases these screw’s pull-out strength, you don’t need to support them with washers. With the compact design of HeadLOK screws, they are reliable for heavy-duty applications.
However, their level of resistance fits a range of dimensional woodwork projects. Each set contains 50 pieces of black and easy to use screws.
#9. SPAX #10 x 3-Inch Screw
Particleboard screws with stronger designs often enhance the quality of wood-on-wood projects. Apart from their sharp points, these double-lock threads of SPAX Flat Head Screws are aggressive. Also, they are ideal for deck framing, and fencing projects.
This double-lock thread technology is patented and it gives each of these stainless-steel screws a faster drive. Regardless of their design, it’s easy to install these flathead fasteners during heavy-duty applications. You don’t need to worry about issues of wood-splitting during the project.
Even with dry lumber, these SPAX #10 x 3-inch screws don’t back out of particle boards. Additionally, they don’t cause squeaking noises because you can drive them quickly.
#10. WoodPro 210-Piece Fasteners
You can remove sturdy construction screws for particleboards easily. However, these 8 X 1-1/2-Inch WoodPro Fasteners have unique nibs under their Square Torx heads.
This nib countersinks very well on different types of materials. Since these galvanized screws are semi-threaded, you can use them for all interior and exterior applications.
While the thread has a right-hand style, its type-17 tip allows you to glides through wood without pre-drilling the workpiece. Also, the pack includes a T-20 Star Bit (25mm) that doesn’t slip off when fastening these screws.
There are 210 pieces of these WoodPro multi-purpose screws per pack. Additionally, these self-drilling screws have a superior gold finish and they are resistant to corrosion.
#. FastenMaster 50-Count TimberLOK Set Of Screws
Unlike the 2-1/2-inch lag Screws, these 6-inch FASTENMASTER TimberLOK screws have stronger shear values. Also, their special tapered heads provide clean countersinks on particle boards.
There are 50 pieces of these heavy-duty screws and a 5/6-inch driver bit per pack. It’s easy to identify this model of FastenMaster wood screw set because of the head-stamped value. Since these screws have high resistance to corrosion, you can reuse them after a long period.
You don’t need to pre-drill dense particle boards and medium-density fibreboard before driving these TimberLOK screws through them. They come with sharp points and coarse threads that penetrate materials aggressively.
How To Buy The Right Screws For Particle Board
What Type of Threaded Design Fits Your Project?
Without long coarse threads, it might be hard to secure particle boards to gypsum (drywall) and wood studs. Usually, multi-purpose screws with quality threaded designs produce good toughness and pull-out strengths.
It’s important to consider these parts of construction screws before picking any favorite model. During maintenance tasks like a replacement of raised garden bed spikes, long screws with amazing pull-out resistance might not ruin the hole in your workpiece.
Instead, their coarse-style threads offer aggressive biting when they are driven. Also, the length and width determine the speed of driving these particleboard screws. Apart from coarse-thread, screws with fine threads are suitable for soft materials.
These helical grooves often come with self-tapping tips. Get high-performance coarse screws that drive through metal sheets, plywood and MDF materials.
The Head Type
Pan and flat-head screws are popular because they flush well on surface materials. Usually, large-head screws for particleboards enhance the bearing surface of your workpiece. Some of the standard types include Phillips #2 and 4 square drive heads.
The snug-fit design of these flat-head screws prevent stripping, and you don’t need washer heads on their countersunk undersides. This design makes your particleboard stable with any small drilled hole.
The Screw’s Length
The length of many regular screws is between 1-1/4 to 6 inches. Usually, premium screws are made of stainless steel materials and manufacturers ensure consistent quality.
The screw’s length from its self-tapping tip to the rounded head should be straight. Also, this design ensures that it glides freely. Since the shank of particleboard screws is often coated with rust-resistant materials, you can use them for both exterior and interior construction projects.
However, the unthreaded head of any screw is often exposed to the effects of weather conditions. When you are planning to join wooden materials, choose a screw that can hold your workpiece tightly.
Frequently Asked Questions
What is the difference between Fine and Coarse threads?
While a fastener with coarse threads has larger pitch than fine threads, the later splits the wood material easily.
More so, fine threads are smaller, but their threads have more than coarse threads’ per specific axial distance. However, I would use coarse-threaded screws on dense plasterboards because they have strong holding powers.
How can I avoid screws that cause cam-outs?
The smartest way of avoiding cam outs is by ensuring the right bit engagement with fasteners. Apart from using a Spider drive that’s compatible with the head of your screw, ensure that your selection of screws come with strong steel materials.
Usually, deep square drive heads engage drive bits neatly, and they can prevent cam-outs. More so, superior trim head designs enhance the ease of use and quick installations during particleboard joining projects.
What are the common types of drives?
Flathead screws are some of the most-used types because their straight-slot designs often fit flat screwdrivers. However, it might be an uphill task to drive these types of screws with power drills or impact drivers. Also, professional woodworkers believe these types of screws are prone to cam outs.
Regular Phillips screws with crossed slots ensure good grips on driver bits. This design reduces the chances of cam outs. Square drives are designed with square caps and you can avoid cam outs with these types of screws.
Apart from the ease of using these screws, you can complete wood-to-wood projects quickly. Additionally, Torx drives have star slots and they prevent cam outs very well.
The rust-resistant coats on screws often enhance their durability. Apart from their clean appearance, you should consider sets of screws with high performance and reliability.
With these features, you can eliminate the chances of choosing poorly-designed screws. Also, you can avoid screw heads that are prone to chipping by using all the tips on this buying guide.
These sets of particleboard screws were selected for avid construction workers, DIYers, and professional woodworkers. After careful comparison with other brands, we are confident that you’ll improve the quality of your particle board-joining projects.